120L-GT
Monoblok Kumanda Kolu
MONOBLOK KUMANDA KOLU 160L-GM
Model160L-GM
This 90L GM directional control valve group is commonly used for wood splitters, tractors, farm equipments, small fishing vessels, earth moving machines, lifting equipments, aerial platforms, boom cranes.
- Nominal flow rating
- 160 l/min.
- Operating pressure
- 250 bar
Teknik veri sayfası
Değerler üretici katalog verisinden birebir aktarılmıştır. Port konfigürasyonu, sürgü tipi ve yardımcı valf seçenekleri sipariş aşamasında belirlenir.
Konfigürasyon desteği alın| Nominal flow rating | 160 l/min. |
|---|---|
| Max. flow | 200 l |
| Operating pressure (max.) | 250 bar3620 psi |
| Max. back pressure | on outlet port T25 bar360 psi |
| Internal leakage A(B)®T | Dp=100 bar – 1450psi fluid and valve at 40°C4cm3/min.0.24 in3/min. |
| Hydraulic fluid | Mineral base oil |
| Fluid temperature | with NBR sealsfrom - 20° to 80°C |
| with FPM (VITON) seals | from - 20° to 100°C |
| Viscosity | operating rangefrom 15 to 75 mm2/sfrom 15 to 75 cSt |
| Min. | 12 mm2/s12 cSt |
| Max. | 400 mm2/s400 cSt |
| Max. level of contamination | 19/16 – ISO 4406 |
| MAIN PORTSBSP (ISO 228/1) · OPTIONAL · UN-UNF (ISO 11926-1) | |
|---|---|
| Inlet P and carry-over C | G 3/4G 11 5/16 - 12 UN - 2B (SAE 16) |
| A and B ports | G 3/4G 11 1/16 - 12 UN - 2B (SAE 12) |
| Outlet T | G 1-1 5/16 - 12 UN - 2B (SAE 16) |
| CONTROL PILOT PORTS | |
| Pneumatics | G 1/8-- |
| Hydraulics | G 1/4-- |
